The Business Why’s of migration to Cisco DNA Center

You have not seen or heard of Cisco DNA Center. While they have done an impressive job with Cisco DNA Center- the talk is often about the technical merits, intents and functions. As we talk of cross domain, I want to cross the domain from what Cisco DNA Center does to why you should move to the solution in terms of business outcomes and user experience.

Recently there has been a lot of talk about Prime Infrastructure to Cisco DNA Center migration. It is important to call-out that while Prime Infrastructure is a network management/monitoring tool, Cisco DNA Center is a platform that does so much more — helping companies accelerate their digital transformation by providing insights, automation, and security across their networks in new and innovative ways.

So why should we move our IT organization to Cisco DNA Center? Part of my answer is that if you want to continue to run IT as we did 10 to 15 years ago – Prime Infrastructure will suit you just fine. However, if you are in a business that is growing, actively working on its digital transformation, grappling with hybrid work, wanting to leverage artificial intelligence and machine learning, or overall want to be more efficient, then you should read on. 

Just as we see electric cars redefining transportation, Cisco DNA Center is redefining enterprise infrastructure software and network management. It is transforming infrastructure organizations across so many different use cases and personas including AIOPS, NETOPS, SECOPS, and DEVOPS which is no small endeavor.

In talking to various CIO’s and IT leaders, a common question comes up; “How do I turn IT into a competitive advantage for my organization?”. I interpret the question to be, “How do I use my IT infrastructure to drive business outcomes?” It is my belief that there are countless opportunities to differentiate depending on your industry sector.

My top 5 reasons why your organization would benefit from Cisco DNA Center:

Your Reputation 

Reputation is critical. An IT organization’s reputation comes from delivery of services and uptime. As network infrastructure has reached the status of utility – everyone expects to have the infrastructure up and running 24/7, anything less than that can hurt the organizational reputation. The fact that Cisco DNA Center can help prevent outages and drastically shorten Mean Time to Resolution (MTTR) directly contributes to reputation. At the University, we are proud of the reputation our IT department has established and it is in large part due to the success we have had with Cisco DNA Center.

Visibility

Visibility; It is impossible to manage that which you can not see. As today’s infrastructure is everywhere, especially with the proliferation of wireless and IoT, visibility into the network with streaming telemetry enhances IT’s ability to monitor and manage the infrastructure. With AI/ML it enables visibility not possible before. As an innovative University IT, with Cisco DNA Center, we have gained tremendous new insights into the health of our entire network estate infrastructure previously not possible with Prime Infrastructure.

Automation

Automation and orchestration is something a lot of IT organizations talk about, but largely speaking, it is more commonly seen managing cloud applications, not network infrastructure. Cisco DNA Center helps with automation workflows which saves time, effort, and creates consistency across the infrastructure and can help eliminate operator errors, the leading cause of outages. The IT staff is so much happier not having to worry about making errors when doing high volume or highly repetitive tasks.

User Experience

User Experience is king – if your IT team does not have a way to measure and track the user experience, it is hard to deliver what you can’t measure. That being said, there are a plethora of different ways to track and measure wired and wireless user experience with Cisco DNA Center. Measuring user experience with Cisco DNA Center is a topic unto itself and warrants its own blog, so stay tuned for that. But so far, our student, faculty, and guest user experience has been dramatically improved since using Cisco DNA Center.

Proactive Management/Actions

Proactive Actions – The fact is that “IT” is a service organization and as we strive to perform service improvement – we make every effort to become more and more proactive. Cisco DNA Center has been able to redefine proactive AI/ML and the ability to identify early stages of failures and allow notification and intervention before it becomes a user-impacting event.

The Machine Reasoning Engine (MRE) is another capability that leverages artificial intelligence (AI) to automate complex network operation workflows. It is like having a 30-year Cisco veteran standing behind your shoulder when you are trying to solve a difficult problem by automatically troubleshooting the issues, identifying the most probable root cause, and providing the recommended corrective action. The MRE is powered by a cloud-hosted knowledge base, built by Cisco, and will progressively give you more and more options to not only automatically troubleshoot issues, but to automatically resolve and remediate them as well. 

Security

Information/Cyber security is one of the holy grails of IT.  I am guessing many struggle with what is more important, user experience or information security. The good news is that they are complementary with Cisco DNA Center.  Cisco DNA Center can help keep the network in compliance with software, best practices, and security advisories. It can also provide visibility to the InfoSec department about the security posture of the infrastructure. To top the icing on the cake, Cisco DNA Center is also able to install hot patches on equipment with IOX-SE without system reloads. This is huge from the aspect that we can react quickly to security remediation when we can do it without having to take downtime.

I know I said top five – but it worked itself into a Top 6 list. The reality is that I can go on and on as with each new release of Cisco DNA Center, there are tons of new features, workflows and innovations added to the platform. Deploying Cisco DNA Center into an organization and realizing its full potential can take some time and effort – but it is super easy to get started and start seeing value right away. There is also an abundance of resources to help your organization achieve its goals and progressively add capabilities at the pace that makes sense to your organization. But rest assured, it will improve how your organization operates and functions and can really add significant business value across your business.

To that end, I wanted to conclude with some tangible business value and benefits that organizations can yield from Cisco DNA Center. As always your mileage may vary (YMMV) depending on your organization.

Ticket Resolution Time (MTTR metric)

◉ Wireless Issue investigation time reduced to minutes; estimated time reduction is 75% from using Prime for the same task.

◉ Ability to use Cisco DNA Center to restore configuration to/from switching hardware failures, reduced hardware recovery time by 50%.

◉ MRE (Machine Reasoning Engine) empowers more Junior-level staff to troubleshoot issues further reducing support costs by 30%.

Reduction in Tickets 

Within 90 days of activity using Cisco DNA Center assurance to optimize the network, we have seen:   

◉ 50% reduction in wireless trouble tickets

◉ Failure detection (power supplies, SFPs) enabling more proactive repair and eliminating troubleshooting through proactive management. 100% reduction for preventable failures from component failures.

Cost Savings/Operational Efficiency improvements

◉ Switch Software upgrades (SWIM) processes resulting in 75% reduction in engineering time, which also translates to 75% savings in labor hours.

◉ Overall team efficiency – with the Cisco DNA Center tools and automation, more Junior-level staff are now able to perform tasks (MRE, visibility), yielding 20% reduction in operations support costs through annual salary savings.

Business Confidence

◉ Sensor data from the 1800s provides a comprehensive view of measured user experience not previously possible.

◉ Security Assessment due to software version not previously automated. This not only reduces the effort but more importantly helps ensure security related compliance previously not attainable with existing staffing levels.

Source: cisco.com

Continue reading

Cisco Secure Cloud Insights is your Eye in the Sky

In the world of cybersecurity where information holds the keys to the kingdom, there is no shortage of data generated by numerous security tools. However, there arguably remains a lack of information. Security professionals often refer to information as ‘Actionable Intelligence’ or ‘Context’. Those engaged in the trenches of cyber warfare would appreciate a more nuanced view which states that Context is the catalyst that converts Data into Intelligence. Context helps answer important questions such as How, What, Where, When and Who, but even more advanced questions such as So What and What Next, to get to the root cause and aid remediation. While context may be an easy concept to grasp, execution remains challenging.

With that context (pun intended) I am pleased to announce the launch of Cisco Secure Cloud Insights in partnership with JupiterOne. Secure Cloud Insights brings fresh and powerful capabilities to the SecureX portfolio, including comprehensive public cloud inventory and insights, relationship mapping to navigate cloud-based entities and access rights, and security compliance reporting. This new offering extends beyond traditional cloud security posture management and will enable Cisco’s security customers to effectively manage risk and reduce the attack surface of their cloud-native processes and applications.

Cisco has witnessed organizations on their digital transformation journeys grappling with IT sprawl and struggling to gain visibility into their cyber universe. Cloud Insights addresses this very pain-point by tracking and normalizing data across multi-cloud and hybrid environments. Cloud Insights provides a knowledge graph of consolidated metadata pertaining to configurations, access policies, settings, tags, rules, and more that govern interaction between entities. Entities encompass users, roles, groups, policies, databases, datastores, devices, code repositories, storage buckets (eg. AWS S3), cloud compute instances (eg. AWS EC2), containers, functions, etc. APIs ingest this data from approximately fifty pre-defined integrations covering public cloud environments, vulnerability scanners, endpoint protection and network security tools, development and code repositories, identity providers, and more. Custom integrations are also supported using SDKs and webhooks.

Figure 1: Visualization of the graph database

While the graph database of mapped interactions is one of the key pillars of Cloud Insights, the other pillar is the ease with which this rich data can be queried. A simple plain language search maps to over 550 pre-built queries, with the option to create custom queries. Queries, singly or in combination, form the basis of all outcomes, be they alerts, summary dashboards, or compliance reports. By querying against this comprehensive relationship graph, tremendous opportunities and use cases become available. Cloud Insights uses this rich context to determine an organization’s security posture, including Cloud Security Posture Management, and reduces exposure by reporting compliance gaps, thereby promoting effective cyber governance and attack surface management.

With this introduction to Secure Cloud Insights, let us examine how the service fits in an organization’s security apparatus. We are experiencing a coming together of security outcomes that serve various stakeholders, be it Security Operations, Development Operations, Application Security, Cloud Architects, or Identity and Data protection processes.

Figure 2: Interaction between various cloud-native security functions

While SecOps starts on the left with security posture and attack surface management as its entry point, DevOps start at the far right with continuous integration and continuous delivery (CI/CD) pipeline and application/API security as their main care about. As SecOps moves right and begins to influence the other stakeholders within a mature organization, DevOps shifts left to include pre-deploy checks by using runtime security inputs. Due to this evolution in operations, tooling is needed to provide end-to-end coverage, no matter who the buying center or user is in an organization. Cloud Insights is thus positioned to provide contextual visibility that encompasses and enhances observability across the entire organization.

It is for this reason that we have integrated Cloud Insights with Cisco’s security platform SecureX and intend to have it play a bigger role as a context wrapper for numerous other Cisco security services. Early research suggests force multiplier effects through interactions with SecureX’s Device Insights, and a symbiotic relationship with Cisco Secure Cloud Analytics (formerly Stealthwatch Cloud). While Secure Cloud Insights connects the dots, Secure Cloud Analytics baselines behavior by analyzing traffic flowing between those dots. Integrated together, they can surface relationship-based and anomaly-based threat vectors. Early interest has also been evinced by the market of this powerful duo’s interaction with other Cisco Secure properties such as Portshift and Kenna. With this partnership, Cisco has strengthened its position to serve our customers’ cloud native and hybrid IT security needs. It has also strengthened the Cloud component in Cisco’s SecureX Platform, as seen in the figure below.

Figure 3: Inclusion of Cloud Insights to Cisco SecureX

Source: cisco.com

Continue reading

Introducing 400G in Access Network

There have been a plethora of articles written on how this pandemic has transformed the way people go about their daily lives. And if there is one thing which everyone agrees is that the role of the Service Provider’s telecommunications network has never been more critical than it has been since the turn of the decade. The need for connecting more devices to the network, the insatiable demand for bandwidth, and the criticality of network reliability have created more expectations and also newer revenue opportunities for Service Providers. This requires Service Provider to re-look at their current network and transform them to provide a reliable and consistent user experience. The access and aggregation network of the service providers are at the cusp of this transformation and are challenged by increased capacity, low latency, ultra-reliability requirements driven by the transition from 1G to 10/25/100G. At Cisco, we have been relentlessly working on transforming the economics of moving the bits to build and run the infrastructure, in a secure and simplified way.

NCS 540 portfolio helps the customer in their transformation journey, with a myriad range of products meeting different capacity and interface requirements all the way ranging from 1G to 100G. As of writing this content in 2021, Cisco has sold over 100,000 devices in a short period of time. To recap the benefits of the NCS540 product family which has seen product launches in each of the years 2018/2019/2020/2021 :

◉ Hardened and ruggedized with transformed economics to move the bits

◉ Large number of interface port options from 100Mbps to 100G

◉ Stringent Timing and latency capabilities

◉ Secure, Reliable, and Carrier-Grade Operating System (IOS-XR)

◉ Application-aware network with Segment Routing

◉ Simplified Automation capability with Telemetry/Netconf Yang.

We are now accelerating the success of NCS 540, by introducing 400G to the access network with NCS 540 Large Density Router

Currently, there is a paradigm shift happening, with the convergence of IP and optical layer, which helps reducing complexity, allows operators to maximize the current fiber capacity, and offer more CAPEX and OPEX savings. The new architecture allows us to put the onus back on the router which helps in simplifying the management of the network. The density and form factor of optics have greatly reduced over time and with the evolution of digital coherent solution, a 400G optics can now directly reside in a router with zero density trade-off. So why does 400G be an option only for Core Networks even though we are seeing the router capacity increasing multifold at the access layer? Why not extend the benefit of the technology innovation all the way to access networks? Our new NCS 540 Large Density router has been designed keeping these innovations in mind.

Cisco has recently published a detailed whitepaper on the Economic Benefits of using Converged 400G IP Transport. With the launch of the NCS 540 Large Density router, we are extending the capability to scale to 400G.

So, what is so unique about our Large Density Router? Built on merchant silicon ASIC, the large density router is now able to extend the 400G coherent technology all the way to the access network. The NCS 540 large density aligns with Cisco Routed Optical Networking Architecture, which relies on a single control plane based on IP/MPLS in a converged hop-to-hop IP and optical network. It is not just about 400G, the large density router also supports SFP56, which offers backward compatibility with SFP28/SFP+/SFP, using the same PAM4 technology used in 400G. All these technological innovations are offered in a 1RU temperature hardened form factor, and 299mm in depth, making it suitable for deployment as a cell-site router, pre-aggregation, or an aggregation router. The platform also offers tighter time and phase synchronization and high-accuracy clocking along with GNSS (Global Navigation Satellite System) capabilities needed for 5G networks.

Powered with Cisco IOS XR software, the NCS 540 Large Density router offers customers an end-to-end SDN-based solution that will enable a programmable network coupled with Cisco’s automation platform that utilizes real-time network telemetry for advanced traffic engineering and control. As operators are looking to upgrade their network for 5G and Broadband deployments, why not future proof it so that you can scale well beyond today’s capacity, performance requirement and offer lower TCO. NCS 540 Large Density router will help in this transition offering better simplification and operational efficiencies.

Source: cisco.com

Continue reading

Catalyst 9000 Simplifies Network-Based Threat Detection Using Inline Security Telemetry

The term Catalyst is synonymous with accelerating change, stimulating actions, and facilitating transformations. The Cisco Catalyst 9000 family of switches and access points support these qualities for enterprise networks around the world, making it the fastest ramping product in Cisco’s history. Based on a powerful and flexible Programmable ASIC with Unified Access Data Plane (UADP) that unites wired and wireless data planes, the enterprise networking platform has delivered continuous innovations since its introduction, including:

◉ Purpose-built Zero-Trust Fabric for campus to branch with Cisco SD-Access

◉ Docker-based application hosting enabling use cases such as running ThousandEyes Agents on the switch

◉ Network-Based Application Recognition Engine (NBAR) for identification and control of 2000+ applications

As enterprise networks expand from centralized data centers and campuses to support a distributed workforce and thousands of edge IoT devices, IT faces unique security challenges. While the workforce can take advantage of zero-trust multi-factor authentication to ensure proper access security, IoT devices cannot. Now Cisco is leveraging the programmability of the UADP ASIC to deliver zero-trust security for the world of IoT devices.

Zero Trust for IoT Using Network Telemetry Analytics

IoT devices should be continuously assessed to check for unusual behavior such as pretending to be trusted endpoints using MAC Spoofing, Probe Spoofing, or Man-in-the-Middle techniques. IoT devices—typically smart building technologies such as lighting, HVAC, and security cameras—need to be segmented from Information Technology assets to prevent threats from moving laterally in the network. The key to segmenting IoT devices is to accurately profile and classify them according to type, communication protocols, and traffic patterns. To implement Zero Trust with least privilege access, both historical and real-time traffic telemetry needs to be available to Trust Analytics to detect sudden changes in device behaviors.

To attempt to accomplish this in the past, overlay solutions required spanning of live traffic from switches to collectors that run analytics on samples of telemetry. These additional components, as depicted in Figure 1, introduce deployment, configuration, and maintenance complexity, thereby increasing the TCO as well as IT overhead.

Figure 1. Typical Overlay Model for Telemetry Generation

The unique way Catalyst 9000 switches and access points solve this problem—in conjunction with Cisco SD-Access—is by generating inline telemetry directly on the switches. This capability, based on the power of the UADP ASIC, eliminates the need to make copies of traffic from every switch to send to multiple services—exporters, brokers, collectors, and analyzers for each kind of traffic—to generate the necessary security telemetry. The capability to stream full telemetry information directly from Catalyst switches provides operational status of the network as well as Deep Packet Inspection of traffic flows so that Cisco DNA Center can detect the true purposes of device-to-device communications. Since DPI telemetry is generated directly by Catalyst switches, the need for expensive extraneous appliances is eliminated, as shown in Figure 2.

Another advantage is that since all Catalyst 9000 switches are generating telemetry simultaneously, there is no single point of failure—such as when a data broker is offline—increasing the reliability of catching abnormal traffic patterns being generated by an attempted infiltration by a threat actor.

Figure 2. Deep Packet Inspection and Telemetry Generation with Catalyst 9000 Switches

Maintaining Zero-Trust Across Campuses

Wired and wireless traffic telemetry in one platform provides an expansive view across the campus for pinpointing security anomalies and threats from devices of all types. Cisco SD-Access plus Catalyst 9000 switches and access points uniquely provide traffic telemetry to Cisco DNA Center to identify device types, categorize devices by security group tags, and monitor every device for behavior anomalies.

For example, with all traffic telemetry streaming from Catalyst 9000 switches and access points, Cisco DNA Center can analyze the traffic being generated by each individual device and identify the type—security cameras, motion sensors, lights—tagging them with access policies for segmentation. Should a camera start talking in laptop language from a man-in-the-middle attack, the trust level of the camera will automatically be downgraded and isolated to prevent the lateral spread of an infection.

The Cisco SD-Access Zero-Trust Journey

Connect, Secure, and Automate with Catalyst 9000 Infrastructure

The software-defined network fabric consisting of Cisco Catalyst switches and access points becomes a vast matrix of sensors supplying data for security analytics that monitor, detect, isolate, and report on threats as they occur. The Catalyst 9000 family of switches provides real-time security telemetry from millions of devices across multiple campus sites, from inner to outer edge of the network for endpoint analytics, policy analytics, and trust analytics to connect, secure, and automate the enterprise.

Source: cisco.com

Continue reading

End-to-End Flow State Validation with Nexus Dashboard Insights Connectivity Analysis

Most IT operations folks are familiar with vaguely worded statements like “My application performance is bad,” “The network is slow,” and “Sometimes it works but sometimes it doesn’t.” Often, there’s very little concrete information to work with when attempting to diagnose network performance problems. Any number of possible culprits across a variety of different devices could be wholly or partially contributing to an issue. That leads to the question: “How do you quickly and definitively identify the issue?”

After ruling out the obvious, and some not-so-obvious, signs of a network issue–things like drop counters massively incrementing on an interface, incorrectly applied QoS or security policies, or insidious microbursts–the IT operator is often left with nothing else to do than delve deep into the guts of the network fabric to ensure that all devices and paths between a source and a destination have proper network state, in both the control plane and the data plane.

The Old Way

How does an IT operator approach this problem? The “Old Way” involves a tedious, error-prone, multi-step workflow to validate that the network is behaving as intended.

First, the leaf switches that have the problematic source and destination device attached must be identified. In this era of multi-tenancy, virtual machine mobility, and dynamic workload placement, identifying the edge devices is not as straightforward as it might seem. The approach typically involves logging into a random leaf switch and checking the local Address Resolution Protocol (ARP) table to see if the target IP happens to be directly attached in one of the virtual routing and forwarding (VRF) instances active on the switch.

Failing that, we can check the routing table in the appropriate VRF, hopefully identifying which remote switch has the IP attached. Next, login to that switch, check the local ARP table, identify the virtual LAN (VLAN) of the endpoint, and then check the media access control (MAC) table to find the physical interface. Repeat the process for the destination IP address. It’s tedious work, but necessary for ultimately identifying the leaf switches involved.

Figure 1 illustrates the typical workflow for identifying where a given endpoint attaches to the network fabric. In this case, we’re looking for host 172.16.112.96 in VRF “tenant1”.

Figure 1. Identifying an Endpoint Location

Once we’ve identified the edge switches with the target endpoints attached, the next task is to identify all the possible paths through the fabric that can be used by those endpoints to communicate and which devices sit in each of those paths. We’ll take a simple spine-leaf topology where each leaf switch connects to four spine switches that provide the leaf-to-leaf interconnection.

If one of our endpoints is on switch “leaf5-ex”, we first identify the destination Virtual Tunnel Endpoint (VTEP) of the other endpoint via “show ip route”, then identify the underlay routing paths available to reach that VTEP. For a simple topology it may be obvious which devices are part of the end-to-end path. In other cases, we can use Cisco Discovery Protocol (CDP) or Link Layer Discovery Protocol (LLDP) neighbor details to identify the device IDs and host names of the transit devices.

Figure 2. Identifying Paths and Devices

Depending on the topology, we may need to repeat this process multiple times to identify all relevant devices and paths. The goal is to identify to which leaf switches the endpoints are attached, the switches that interconnect them, and the interfaces that make up the available paths.

Next, we must validate that the control plane routing and forwarding state on every device along each of the paths is correct and consistent with the data plane state. We must connect to each device and check a variety of components, which may include routing protocol state, routing information base (RIB) state, spanning-tree state, interface status and health, and so on. We may also need to run one or more consistency checkers, which is logic built into NX-OS to ensure that the forwarding state known to the control plane is consistent with the contents of the Forwarding Information Base (FIB) and other hardware tables programmed into the ASIC hardware. This validation can be time-consuming and error prone. Wouldn’t it be nice if there was an easier way?

The Easy Way

It turns out, there is an easier way! Nexus Dashboard Insights, with its powerful Connectivity Analysis tool, takes the elements of tedium and human error out of the process of validating the end-to-end path between two endpoints in the network fabric. With minimal operator interaction, the Connectivity Analysis tool ensures that all fabric devices have up-to-date diagnostic capabilities, identifies which leaf switches the targeted endpoints are connected to, identifies all possible paths between those endpoints, and then ensures that both control plane and data plane states are valid and consistent to enable end-to-end network connectivity through all relevant devices.

NOTE: As of Nexus Dashboard Insights version 6.0, the Connectivity Analysis tool is available for NX-OS-based fabrics. A planned future release will introduce similar functions for Application Centric Infrastructure (ACI) fabrics as well.

Not only does the Connectivity Analysis tool validate the end-to-end network state, it also generates an intuitive path view showing all network devices in the path and highlighting any issues encountered that could affect successful communication between the target endpoints.

Figure 3 shows the main Connectivity Analysis screen when you open Nexus Dashboard Insights, presenting a summary of all prior analysis jobs with their current state (Completed, Failed, In Progress, etc.) as well as a button for creating a New Connectivity Analysis job. Of course, a Representational State Transfer (RESTful) API is also available for automating creation of new analysis jobs and querying their status.

Figure 3. Connectivity Analysis Tool in Nexus Dashboard Insights

Taking the earlier example, if we’re debugging an issue between a known source and destination endpoint, we can create a new Connectivity Analysis job and simply plug in the source IP, destination IP, and VRF information. The tool can analyze both Virtual Extensible LAN/Ethernet VPN (VXLAN/EVPN) flows as well as “Classic” Layer 2 or Layer 3 flows and provides an option to run the analysis in Quick mode or Full mode. Figure 4 shows the Analyze Connectivity screen where you enter the required information and control the various job options.

Figure 4. Connectivity Analysis User Input

In Quick mode, the Connectivity Analysis tool simply validates the basic control plane, forwarding health on relevant devices, including all overlay and underlay routes and interfaces, while also generating a visualization of the path topology between source and destination. In Full mode, multiple additional checks are performed, including a complete analysis of consistency between software and hardware forwarding state in all relevant forwarding tables.

Figure 5 shows the completed job summary, the topological view of all the network devices and paths between the source and destination, and a full Event Log with details of the job.

Figure 5. Completed Connectivity Analysis Job Summary

Double-clicking any network node opens details for that device. Figure 6 shows the detail view (in this case for the device “spine2-fx2”), including summary data, path information, and detailed interface information for the relevant interfaces, with a description and status of each validation check performed as part of the analysis.

Figure 6. Job Details for an Individual Switch

While the examples above uncovered no problems, if a job encounters an issue on one or more nodes, the tool shows all the details of the failure and impacted devices. For example, Figure 7 shows a failed job where an inconsistency was discovered between the software state and the hardware programming on a spine node.

Figure 7. Connectivity Analysis Discovering an Issue

Double-clicking on the failed node (spine1-fx2) reveals the cause of the failure (as shown in Figure 8). A control-plane route was not programmed into the hardware correctly, resulting in an inconsistency. Since the failure is on a spine node, such a programming failure can result in sporadic issues. For flows that hash to other spine nodes, performance is not impacted, but any flows hashing to the mis-programmed spine could be black-holed.

Figure 8. Failed Node Details

Uncovering such situations can vastly reduce the time required to conduct root cause analysis for forwarding issues in a large fabric. With the option in Nexus Dashboard Insights to collect detailed technical support data from the fabric and upload it to Cisco with just a few clicks, triaging issues locally or with Cisco TAC and driving them to resolution becomes considerably less time-consuming and work intensive.

Key Takeaways

The Connectivity Analysis tool provided by Nexus Dashboard Insights delivers a new level of simplicity and efficiency to the traditionally error-prone and time-consuming task of validating the end-to-end path between endpoints experiencing performance issues or packet loss. With just a few key pieces of information, the Connectivity Analysis tool does all the heavy lifting for you: identifying the leaf switches to which those endpoints attach, discovering all the possible paths between those endpoints through the fabric, and validating the health and consistency of each device and path involved.

Armed with the resulting data, IT operators can either rapidly prove that the network is “innocent” and that the problem likely lies with the host or application or, if a problem does exist in the network, identify the exact nature of the problem and the devices involved. With the additional capability in Nexus Dashboard Insights to easily collect logs and other technical support data and upload it to Cisco via the Cisco Intersight Cloud, tracking down problems in the network and driving them to rapid resolution is easier than ever before!

Source: cisco.com

Continue reading

Connecting people, places, and things – Cisco Networking innovations for hybrid work

The world is changing and the structure of connectivity between users, businesses, and devices has entered a new dimension. The rate of transformation has accelerated, including major advances in collaboration and access to applications and data from anywhere. However, remote connectivity has enlarged the attack surface for cyber criminals and troubleshooting outside your corporate border is challenging.

Our customers are looking for solutions for hybrid work, providing agility for users to securely connect from work, home and everywhere in between. Businesses must empower their hybrid workforce with seamless access to cloud applications and high-quality collaborative experiences. IT is also tasked with maintaining security, control, and governance across devices, networks, clouds and those applications.

Our latest Networking innovations provide advanced analytics and insights to improve operations for remote IT operators, along with greater integration with storage and cloud providers for more seamless and secure access to applications and data. Learn more about how these innovations can improve the user experiences to support hybrid work environments below.

Wireless 3D Analyzer in Cisco DNA Center

Simplified Operations for the Workforce and Workspace

To better support the demands of the hybrid workspace, the Cisco DNA Center release 2.2.3 brings exciting upgrades that enable IT to improve wireless performance, facilitate zero trust networking, and support smart building deployments.

With the new Wireless 3D Analyzer, Cisco announces the first true 3D wireless indoor propagation tool. Use your mouse to move around and visualize where signal is propagating through the actual architectural design of your office. You can simulate adding walls or reorganizing the workspace to accommodate your return to office plan. Then do a simulation of the new wireless network design to support this new plan so that you buy what you need without over-dimensioning. And IT teams can simulate this office redesign without being in the office themselves.

Now you can enjoy real time visibility over your zero-trust network like never before. Across both your offices and remote workers, a new policy analytics dashboard gives you complete policy and endpoint status at a glance. You’ll see alerts for any attempted policy violations, including spoofing detection, and a granular trust score engine for specific details on endpoint security decision parameters.

Deploying Smart Buildings means supporting more and more IoT endpoints. Network teams struggle to get complete visibility for PoE switch capacity and actual endpoint power consumption without visiting remote branches. Our new PoE Analytics dashboard can show your team actual power usage, available power, and in which ports. The tool then monitors these devices for unusual power consumption and other anomalies. Need to send five new IP cameras to the office in Singapore? Now you can tell the local team what switch ports have power and monitor the usage.

We are also making it easier to add on other Cisco DNA software products to your network with the Cisco DNA Expansion Pack. This new offer allows you to enhance your Cisco Networking solutions with SD-Access, Zero Trust Networking, Encrypted Traffic Analytics (ETA), digital experience monitoring, location analytics and assurance. It provides flexible way to purchase Cisco Identity Services Engine (ISE), Cisco DNA Spaces, Cisco ThousandEyes, Secure Network Analytics (Stealthwatch) and other licenses, appliances, and services in one convenient bundle.

Putting IT in control of Internet traffic

Hybrid work has also shifted traffic patterns, where more traffic runs across the Internet. To securely scale out your network to the Internet, Cisco SD-WAN provides a software-defined approach to managing across your users, branches, clouds and the Internet. Businesses are moving to a multicloud environment that requires secure connectivity everywhere and visibility that extends from into your enterprise network and beyond into the cloud.

Now, more than ever, enterprises need agility to adjust their business models as they continue their journey to the cloud. In this release, we are offering greater interconnection with Cloud and SDCI partners, enhanced multitenancy support and several other advancements for Cisco SD-WAN.

Cisco SD-WAN Cloud Interconnect with Equinix delivers seamless, automated connectivity to multiple IaaS and SaaS environments, without all the complexity. The joint solution enables customers to create network connections to their multicloud deployments with greater agility, reduced operating costs, and increased speed to market compared to classic connectivity options. ​

Managing multi-domain networks and applications has created complexities and IT requires a simple approach. The integration of Cisco SD-WAN Cloud Hub with Google Cloud Service Directory allows enterprises to automate SD-WAN policy for custom applications in multicloud based on application profile. ​The solution bridges DevOps and NetOps; now DevOps can define traffic profiles in Google Cloud Service Directory and NetOps can translate those profiles into network policies.

Cisco Cloud OnRamp for IaaS: Azure Secure vWAN extends the SD-WAN policy seamlessly to Microsoft Azure and then it provides analytics via telemetry for troubleshooting in Azure as well as secures connectivity to every type of traffic flow. Cisco is the first Enterprise SD-WAN Partner to support an additional layer of security with support for service chaining with Azure Firewall in the Azure Virtual WAN Hub. This process has traditionally been manual and tedious. With this integration, the guesswork is removed, and customers can save time by automatically securing any traffic whether it originates from branch to host vNets, or vNets to Branch, branch to internet or vNet to Internet.

Many customers rely on a Managed Service Provider (MSP) to build out their SD-WAN. Recent enhancements in Cisco SD-WAN Multitenancy increases both scalability and security, which will increase capacity and density to scale and reduce costs for MSPs as well as large enterprises that require multitenancy. The addition of Reverse Proxy adds a layer through which access to Cisco vManage occurs using a Proxy server providing an encrypted bi-directional communications path. The shared control, management, and orchestration plane across multiple tenants will reduce CapEx. Single pane of glass for management and operations of multiple tenants reduces OpEx and flexibility is increased with support for on-prem and cloud, API support and support for KVM and ESXi.​

The Cisco vManage User Interface (UI) has been updated providing a highly visualized and more intuitive user experience that simplifies network management and onboarding of SaaS, IaaS, and security for network operators with expanded pre-configured templates and guided step-by-step configuration.

In a previous release, we provided integrated Unified Communications on the Cisco SD-WAN platform – eliminating the need for a separate UC platform with the associated acquisition and support costs. In this release, we are offering further platform consolidation incorporating the 5G connectivity into Cisco SD-WAN Edge platforms with the new 5G Pluggable Interface Module (PIM) and Cisco mGig WAN module (NIM). ​This eliminates the need for a separate gateway. Manage up to 3.3Gbps of cellular edge routing in Cisco SD-WAN with direct internet access at the branch and connect to multicloud applications regardless of broadband availability.

In addition to all this news, look out for an exciting announcement next week on how Cisco will provide more customer choice and flexibility in expanding Cisco DNA Software capabilities.

Cisco continues to innovate to address the hybrid workplace transformation the world is undergoing. A secure, agile network has never been more important, and our solutions will help you enable a safe return to the workplace, secure work from home and anywhere access to multicloud applications.

Source: cisco.com

Continue reading

Simplify Hybrid Cloud Networking with Cisco Nexus Dashboard

Simplicity is the ultimate sophistication.  – Leonardo da Vinci

For IT, complexity is the antithesis of agility. However, with the increased demand for remote healthcare, distance learning, hybrid work, and surging dependence on online retail, there is an urgent shift to hybrid and cloud-native applications to keep up with the necessary digital transformations—thus adding complexity.

Hybrid cloud is now the reality for nearly all enterprises. Workloads are distributed across on-premises, edge, and public clouds. However, seamless operations of hybrid cloud applications across distributed environments needs to address stringent location-dependent requirements such as low latency, regional data compliance, and resiliency. Adding to the complexity is the additional need for governance—compliance, security, and availability—to which networking teams need to adhere. The need for visibility and insights closer to where data is created and processed—on-premises, cloud, and at the edge—is also critical.

Hybrid Cloud Networking Challenges

 

How does an operations’ team deal with this complex new hybrid cloud networking reality? They need three operational capabilities:

◉ Obtain a unified correlated and comprehensive view of the infrastructure.

◉ Gain the ability to respond proactively across people, process, and technology silos.

◉ Deliver speed of business, without increasing operating costs and tool-sprawl.

It is a multidimensional challenge for IT to keep applications and networks in sync. With the ever-increasing scope of the roles of NetOps and DevOps, an automation toolset is needed to accelerate hybrid cloud operations and securely manage the expansion from on-prem to cloud.

Flexible Hybrid Cloud Networking with Cisco Nexus Dashboard

Cisco Nexus Dashboard 2.1, the newest of Cisco’s cloud networking platform innovations, will help IT simplify transition to hybrid applications using a single agile platform. Besides bridging the gap in tooling, one of the major capabilities of the Nexus Dashboard is enabling a flexible operational model for different personas—NetOps, DevOps, SecOps, and CloudOps—across a plethora of use cases.

Cisco Nexus Dashboard: One Scalable, Extensible Platform Across Global Hybrid Infrastructure

Conventionally, operators relied on disjointed tools for specific functions across connectivity, visibility, and security. With multiple capabilities being natively integrated into the Cisco Nexus Dashboard, as well as 3rd party services, Cisco is simplifying the overall experience for IT.

Operators can now manage their hybrid cloud network infrastructure with ease from a single automation and operations platform, Cisco Nexus Dashboard—whether they are running Cisco Application Centric Infrastructure (ACI) or Cisco Nexus Dashboard Fabric Controller (NDFC) in their hybrid cloud infrastructures.

New innovations with Nexus Dashboard 2.1 include availability on AWS and Azure marketplaces; Nexus Dashboard One View, which provides a single cohesive view of all the sites being managed and the services installed across Nexus Dashboard clusters; advanced endpoint analytics; scalable connectivity through Nexus Dashboard Orchestrator (NDO); Nexus Dashboard Insights (NDI); Nexus Dashboard Data Broker (NDDB) service; and many more capabilities. Let’s look at five capabilities of Cisco Nexus Dashboard 2.1 that are delighting customers.

1. Hybrid Cloud Connectivity at Scale with Nexus Dashboard Orchestrator

New hybrid cloud capabilities include support for Google Cloud—in addition to AWS and Azure integrations—and connectivity automation capabilities to enable new use cases, such as:

◉ External Connectivity: Cloud VPCs/VNet to external devices (branch router, SD-WAN edge, colocation routers, or on-prem routers)

◉ Hybrid Cloud Connectivity: Automate connectivity for GCP, AWS, and Azure clouds and on-premises ACI sites using BGP and IPSec

◉ Stitching connectivity: Cloud VPCs/VNET, On-Prem VRFs, including route management

Connectivity is established by BGP peering and IPSec tunnels connecting the cloud site’s Cloud Services Routers (CSR) or Google Cloud’s Native Cloud Router, to the external devices. Once connectivity is established, IT can enable route leak configurations to allow subnets from the external sites to establish connectivity with the cloud site’s VPCs/VNETs.

2. Change Management Workflow with Nexus Dashboard Orchestrator

In a modern enterprise IT team, there are typically multiple personas involved from design to deployment. The design team (Designer Persona) can create and edit the Nexus Dashboard Orchestrator templates and send them to the deployment team (Approver/Deployer Persona) for approval. The deployment team reviews and approve templates ahead of a change management window and queues the templates for deployment during the actual change management window.

Starting with the latest version, Nexus Dashboard Orchestrator 3.4(1) release, a structured persona-based change management workflow provides additional operational flexibility. Three personas for template management—Designer, Approver, and Deployer roles—are available. An admin can assume one of these roles or a combination of them.

◉ Designers: Create and edit template application policies and sends them to Approvers for review and approval.

◉ Approvers: Review the templates and either approves for deployment or rejects the proposed changes and sends it back to the Designer to update the template based on comments.

◉ Deployers: Deploys templates or initiates a rollback to previous version of template.

When Approvers review the templates, they have a GitHub-style “diff view” to clearly compare the before and after changes so they can easily review, approve, reject, and comment on the template differences.

Deployers have two additional new capabilities for effective change management operations:

◉ Configuration preview: Preview of the exact configuration—XML Post and graphical views—that will be deployed to the sites so the Deployer can decide to proceed or abort deployment commit.

◉ Template versioning / rollback: Each template is automatically versioned during save or deploy, giving the Deployer the ability to rollback to previous template versions. During rollback the Deployer can see the GitHub style diff between two versions and decide to proceed with the rollback.

Since Nexus Dashboard Orchestrator change management is fully API based, IT can integrate the workflow with in-house tools currently in use.

3. Unify Hybrid Cloud Operations with Nexus Dashboard One View

With Nexus Dashboard 2.1, IT can operate their distributed environment across multiple clusters from a single focal point of control, with the ability to span visibility into fabrics. The scale out architecture adapts to growing operational needs while the One View capability provides a single pane of glass experience, with support for Single Sign On (SSO) and Role Based Access controls (RBAC). This enables operators to consume insights, advisory, and assurance stack as a unified offering to address prevention, diagnosis, and remediation.

Cisco Nexus Dashboard One View

 

Nexus Dashboard 2.1 takes visibility of network traffic up a notch with support for flow drops, giving IT the ability to identify packet drops in the network as well as the location and reasons. Flows impacted due to events in a switch like buffer, policer, forwarding drops, ACL drops, policer drops, etc. are identified using Flow Table Events (FTE).

Cisco Nexus Dashboard Data Broker

In addition, Cisco Nexus Dashboard Data Broker (NDDB) is a one of the newest Nexus Dashboard service that facilitates visibility by filtering the aggregated traffic and forwarding traffic of interest to the tools for analysis. It is a multi-tenant-capable solution that can be used with both Cisco Nexus and Cisco Catalyst fabrics.

4. Predictive Change Management with Nexus Dashboard Insights

IT can now predict the impact of the intended configuration changes to reduce risk.

◉ Test and validate proposed configurations before rolling out the changes

◉ Proactive checks to prevent compliance violations, while minimizing downtime and Total Cost of Ownership

◉ Continuous assurance to address compliance and security posture

Predictive Change Management with Nexus Dashboard Insights

5. Nexus Dashboard APIs: Automation and Operational Agility for NetOps and DevOps

Cisco Nexus Dashboard now enables a rich suite of services through APIs for third-party developers to build custom apps and integrations. Nexus Dashboard APIs enable automation of intent using policy, lifecycle management, and governance with a common workflow. For example, IT can consume ITSM and SIEM solutions with ServiceNow and Splunk apps available through Nexus Dashboard.

The HashiCorp Terraform and Red Hat Ansible modules published for Nexus Dashboard enables DevOps, CloudOps, and NetOps teams to drive infrastructure automation, maintain network configuration as code, and embed the infrastructure config as part of the CI/CD pipeline for operational agility.

Our Customers Love Nexus Dashboard, and You Will Too!

As a unified, simple to use automation and operations platform, Cisco Nexus Dashboard is the focal point that customers such as T-Systems can use to build, operate, monitor, troubleshoot, and manage their hybrid cloud networking infrastructure.

Are You Ready for Simplicity?

In IT operations, network automation is the key to simplify hybrid cloud complexity, meet KPIs, and increase ROI. Incorporating the needs of NetOps, DevOps, SecOps and CloudOps for full lifecycle operations is table stakes to make this a reality. The latest updates to Cisco Nexus Dashboard deliver the simplicity expected by IT operations teams to become a trusted partner in their digital transformation journey.

Source: cisco.com

Continue reading