Cisco ACI Best Practices: Upgrade your Fabric with Confidence

Cisco first launched the Application Centric Infrastructure (ACI) in November of 2014. Since that launch, the solution has proven to be a tremendous success in the Data Center. I don’t say this to blow our own horn, but rather to make a point that in the past 8 years, Cisco ACI has been widely deployed by customers large and small (and every size in between) across any vertical or industry you can think of. Internally our engineering team has done a tremendous amount of work to bring new features, capabilities, and topologies at a very rapid pace. All of this while, fixing bugs and addressing security concerns as they are discovered.

The result of such a large install base and choice of software release is that over time we find every possible mix of hardware and software version, feature, and deployment type. The question I ask myself is this: “Are customers realizing the fullest potential and best outcomes with their investment in ACI?” In many cases, I can say yes. But there is still room for improvement. We see many customers on what I would consider older code. This not such a bad thing but it makes me wonder why. I have a few assumptions. Maybe upgrading ACI is seen as complex, or maybe it takes too long, or perhaps the confidence and knowledge in the process isn’t there yet (after all we don’t upgrade every day). I can sympathize. ACI fabrics are the foundation of all the important and business critical workloads that run our customers’ businesses. Upgrades should be approached with planning and care and should be designed for zero to near-zero disruption. Furthermore, there is a constant balance between feature velocity and code maturity such that there is never one approach that fits all customers.

If you are with me so far, I have some good news to share on a few fronts.

New Software Lifecycle and Cadence

One of the most asked questions we get is “What version of code do you recommend I should be running?” 

That question can sometimes make me sweat a little bit because every customer’s datacenter is unique and built to solve specific requirements and needs. Everyone’s configuration is different enough that there may not be a one-size fits all answer. As with anything in IT, it depends.

Imagine a range of customers where on one end you have a profile that cares more about features and capabilities. We have many of these types of customers, some of them quite large and sophisticated. They move fast and prefer to push the boundaries of what is possible because it tends to give them an edge in what they are trying to achieve. On the other end we have a customer profile that is mostly concerned with uptime and stability. This type is careful, and risk averse but with very good reason. Mission critical workloads want to avoid any kind of chance of interruption or inconsistency.

Internally, we’ve come up with a new approach that offers a choice to satisfy both types. With ACI version 6.0, we will introduce a new release cadence (see figure 1).

Figure 1: New ACI and NX-OS Release Cadence

The general idea is to provide clear version lifecycle visibility with consistent timing for when we add or enhance features versus when we are strictly identifying and fixing bugs.

Each major release (6.0, 6.1, 7.0 and beyond) will have a pre-defined lifetime of 4 years. This way everyone knows upfront where they may be in the cycle with a lot of time to plan for future upgrades when it makes sense to do so. Furthermore, within each major release, the first 12 months will be all about introducing or enhancing features. Our engineering teams publish point releases every 3-4 months on average. The result is that 6.0.1, 6.0.2 and 6.0.3 will all be feature releases. This is great for those customers who desire features most. Once we pass that year mark, we will move into a maintenance cycle where we no longer introduce features but focus solely on fixing bugs, enhancing stability and hardening security.

In parallel we are working on the next major release that follows the same pattern but staggered to release a year later. If you are a profile that desires features first, you can choose to move up to the next major release (from 6.0.x to 6.1.x) but if you are a customer who prioritizes code stability first and foremost, you can continue with the current release across the remainder of its lifetime. Customers can then upgrade years later when those newer major releases have moved into their respective maintenance cycle (and thus get features and stability as they do so).

Upgrade Best Practices

When the time comes to actually do an upgrade, it is best to plan accordingly and go into it with eyes-open for the best results. Over the years, Cisco has published many documents and technotes detailing the process. One of the things we’ve realized is that these documents were not all gathered in the same place online and making it hard for customers to have all the info they might need at their fingertips. In the last year, we’ve re-organized, updated and collected everything related to upgrades and made it available from one landing page.

Even better, we’ve created an online checklist that details each step in the process with links to more information about that step (see figure 2). This makes it a lot easier to plan, prepare and do the upgrade with minimal or even no downtime. Following this checklist is the upgrade best practice and we strongly encourage its use.

Figure 2: Cisco ACI Upgrade Checklist

Finally, to help add more color and share experiences, we’ve been delivering webinars to customers and partners about ACI upgrade best practices. We’ve posted the video recordings of such events in multiple places.

Useful Tools To Help You Upgrade

The last bit of good news on this topic is that we’ve released a few useful tools that can add more visibility, pre-checks and guidance. I’ll share details about three items here.

1. On our DC App Center Portal, we’ve included an app called the Pre-Upgrade Validator. This is a free app that you can install and run right on APIC. It offers an easy and visual way to run a pre-check of various aspects of your fabric against the version of code you are planning to upgrade to. While not exhaustive, it includes checks for faults and common recommended configurations (like nodes not in a VPC pair).

2. On Cisco’s Github repository for Datacenter we’ve published the ACI-Pre-Upgrade-Validation-Script. This is a free Python script that you can copy to your APIC and run from the CLI. Don’t worry if you are not familiar with Python, the process is extremely easy and well documented at the link above. This script is in the same spirit as the visual application from the DC App Center. However, the script runs a number of added checks and is more frequently updated. If you have your own Github account, you can even open feature requests for added checks that you want and our developers will consider them. Both the app and script are fully supported by Cisco. I prefer the script given it can do a bit more.

3. Nexus Dashboard Insights (see figure 3) – Firmware Update Analysis feature is one of those useful capabilities of Nexus Dashboard Insights specifically designed to address and care about the many operational details in your environment and where they intersect an upgrade. I’d say this is the most comprehensive tool and recommended if you have Nexus Dashboard Insights deployed in your environment. It goes a fair bit deeper than the other tools I mentioned because it leverages more of the correlation and machine learning that is at the core of the platform. It performs detailed checks before and after an upgrade, including a review of available versions with an eye on relevant bugs including links to bug details and release notes. It records the health, policy, and operational states of your fabric before the upgrade, and then runs an additional delta analysis after the upgrade to see if anything has changed or is not as expected. If something is amiss, Nexus Dashboard Insights will let you dig in and quickly learn about where, what, when, and even recommendations on how to correct things.

Figure 3: Firmware Update Analysis in Nexus Dashboard Insights

If you want to know more about applications like Nexus Dashboard Insights, this is a good place to start: https://www.cisco.com/go/nexusinsights

Final Thoughts

Upgrading your ACI Fabric has never been easier. You can approach an upgrade with intelligence, insight, and a clear plan. There is no reason not to upgrade to the most recent version you are comfortable with. You gain features, stability, security and ultimately realize the best return on your investment in Cisco ACI.

Source: cisco.com

Continue reading

Demonstrating Trust and Transparency in Mergers and Acquisitions

Demonstrating Trust and Transparency in Mergers and Acquisitions 

All good relationships are built on trust. Add in transparency, and the union becomes even more substantial. “Trust and transparency underpin everything we do,” says Button, “Cisco takes security, trust, and transparency very seriously, and it’s part of our team’s fabric.”

When Cisco acquires a company, the Security and Trust M&A team looks at not only what they can offer in the way of security but also what unique qualities the acquired company brings to Cisco. These qualities might be related to security, but they’re also found in the acquired company’s culture, technical knowledge, and processes.

In all acquisitions, the M&A team needs to move fast. In fact, the Cisco team is committed to pushing even faster as long as they never compromise on security. Around 2020, Button and his team began taking stock of how it does things. They evaluated everything from the ground up, willing to tease out what is working and toss out what isn’t.

The team is also on a trajectory of identifying how it can digitize and automate security.

“If we were going to do things differently, we needed to be bold about it,” says Mohammad Iqbal, information security architect in the Security and Trust M&A team. One of the changes Iqbal proposed to his colleagues is to ensure that an acquired company is integrated into Cisco’s critical security controls within three months after the acquisition deal closes.

Focus on Non-Integrated Risks

To successfully meet the three-month target, the M&A team works closely with the acquired company to identify and address all non-integrated risks (NIRs) that Cisco inherits from an acquisition and encompass:

◉ Visibility to get the acquired company integrated into the governance process; includes risk assessments and familiarity with all the players involved in the acquisition

◉ Vulnerability management to identify and remediate vulnerabilities. Where do the acquisition’s crown jewels reside? What does the external attack surface look like? Has it been patched?

◉ Security operations to determine such functions as identity, administrative access, multifactor authentication, and basic monitoring.

NIRs are a subset of eight security domains, or operating norms, that align with Cisco’s security and trust objectives and top priorities of the larger security community (Figure 1). The M&A team’s focus on NIRs steers the due diligence conversation away from identifying the acquisition’s security deficiencies and towards understanding the inherent risks associated with the acquisition and measuring the security liability.

“Acquisitions are coming in with these risks, and so we must address NIRs early when we’re signing non-disclosure agreements. In doing so, we help put these companies in a position to integrate successfully with all the security domains. And this integration should be done in the shortest time possible within a year of close,” Iqbal says.

Figure 1. Cisco’s Eight Security Domains

Building trust and being transparent early on is critical so the acquired company knows what’s expected of them and is ready to accomplish its three-month and first-year goals.

“I wish this type of conversation was offered to me when Cisco acquired Duo,” Button says. “Being on the Duo side of that deal, I would’ve been able to say with confidence, ‘OK, I get it. I know what’s expected of me. I know where to go. I know what I need to do with my team.’”

“We have a limited time window to make sure an acquisition company is heading down the right route. We want to get in there early and quickly and make it easy,” adds Button.

Time Is of the Essence

Reducing the manual intervention required by the acquired company is integral to helping the acquisition meet the three-month goal. Here’s where automation can play a significant role and the M&A team is looking toward innovation.

“We’re working on bringing in automated processes to lessen the burden on the acquired company,” says Iqbal. The M&A team realizes that much of the automation can be applied in instrumenting the security controls and associated APIs to help the team move beyond what they have already assessed at acquisition day 0 and gain the visibility they need to get the acquired company to its three-month goal. For example, they can automate getting the acquired company on Cisco’s vulnerability scans, using internal tools, or attaining administrative access privileges.

So, Iqbal, Button, and the rest of the team are working on automating processes—developing the appropriate architecture pipeline and workflows—that help acquired companies integrate critical security controls. While the ability to automate integration with security controls is not novel, the innovation that the M&A team brings to the table is the ability to position an acquired target to integrate with security controls in the most expedited way possible.

Automation in Discovery

As with due diligence, the M&A team strives to complete the discovery phase before the acquisition deal close. Here’s another step where digitization and automation can simplify and shorten processes. Take the acquisition company questionnaire, for instance.

“Instead of asking dozens of questions, we could give the company an audit script to run in their environment,” Iqbal says. “Then, all they have to do is give us the results.”

Also, the questionnaire can be dynamically rendered through a dashboard, improving the user experience, and shortening completion time. For example, the number of questions about containers could automatically retract if the acquired company uses Azure Kubernetes Service.

After the Close

Many teams within Cisco compete for an acquired company’s time before and after an acquisition deal closes. The acquired company is pulled in several different directions. That’s why the Security and Trust M&A team doesn’t stop looking for ways to digitize and automate security processes after the close—to continue to help make the acquired company’s transition more manageable.

“If we can make processes simple, people will use them and see the value in them within days, not weeks or quarters,” says Button.

“The majority of companies we acquire are smaller,” Button says. “They don’t have large security teams. We want them to tap our plethora of security experts. We want to enable an acquired company to apply Cisco’s ability to scale security at their company. Again, we want things to be simple for them.”

The M&A team helps facilitate simplicity by telling a consistent story (maintaining consistent messaging unique to the acquired company) to all the groups at Cisco involved in the acquisition, including M&A’s extended Security and Trust partners such as corporate security, IT, and supply chain. Because each group deals with different security aspects of the integration plan, it’s essential that everyone is on the same page and understands the changes, improvements, and benefits of the acquisition that are relevant to them. Maintaining a consistent message can go a long way toward reducing complexity.

It’s All About Balance

The human element can easily get overlooked throughout an acquisition’s myriad business, technical, and administrative facets. Balancing the human aspect with business goals and priorities is essential to Button and the entire Security and Trust M&A team. They want to bring the human connection to the table. In this way, trust and transparency are on their side.

“Emotions can run the gamut in an acquisition. Some people will be happy. Others will be scared. If you don’t make a human connection, you’ll lose so much value in the acquisition,” Button says. “You can lose people, skillsets, efforts. If we don’t make that human connection, then we lose that balance, and we won’t be off to a great start.”

One way the M&A team helps maintain that balance is by embracing the things that make the acquired company unique. “It’s vital to identify those things early on so we can protect and nurture them,” says Button.

He also wants to remind companies that they don’t have to be experts at everything asked of them during acquisition. “Cisco has been here for a while. We have entire teams within M&A that are dedicated to doing one thing. We can help acquired companies find out where they’re struggling. We can handle the things they don’t want to deal with.”

“M&A is complex, but complexity is off the chart when you talk about M&A and security. Our team won’t be successful if we can’t find a way to make things easier for the acquired company. They need to understand where they’re headed and why,” Button says. “It’s up to us to motivate them towards a successful outcome.”

Source: cisco.com

Continue reading

CCNA Practice Test Will Help You With the Real Exam

If you want to propel your IT and networking career by taking the CCNA certification exam, you have come to the right place! This article will impart complete information on all the CCNA syllabus topics, exam details, tips, and how the CCNA practice test can help you get a flying score.

Cisco 200-301 Exam Overview

The Cisco 200-301 or CCNA exam incorporates what an applicant should know to become a skilled networking professional. Cisco 200-301 exam covers the following topics:

•  Network Fundamentals (20%)
• IP Services (10%)
• IP Connectivity (25%)
• Network Access (20%)
• Security Fundamentals (15%)
• Automation and Programmability (10%)

And mastering these topics will allow applicants to obtain the well-known CCNA certification. To focus on the fundamentals, the CCNA 200-301 exam will include 90-110 questions and needs to be finished in 120 minutes. But, the journey won’t begin until you pay the application fee - $300. After that, to help you cover what will be evaluated in this Cisco exam, the vendor provides one training course with a similar name, Implementing and Administering Cisco Solutions (CCNA), that’s completely practical and actual information-based.

CCNA is an entry-level certificate offered by Cisco, as a justification for your skill to excel in a practical networking field. Moreover, it concentrates on IT technologies and combines networking skills with technical expertise to ensure successful applicants are armed with all the essential skills in just about all domains of the digital world.

Top Tips to Crack CCNA 200-301 Exam Like a Pro

1. Know the Cisco 200-301 Exam Details In-Detail

A solid starting point for the CCNA 200-301 exam is knowing the exact CCNA syllabus topics. Indeed, you are never going to pass this exam on the first attempt if you don’t understand what it will include, how much time you will be given to finish the questions, and what task formats you will confront.

2. Build a Realistic Study Plan That You’ll Actually Stick To

A study plan is excellent, but it creates monotony, whereas creating a realistic study plan will be helpful. For the Cisco 200-301 exam, determine how much time you wish to spend on every objective, what resources you will utilize, and when you want to take the exam. Planning will also help you sidestep stress and keep you stimulated.

3. Use the CCNA Practice Test

It’s good if you wish to get a feeling of the actual exam environment before the scheduled exam date. This will help you familiarize yourself with the exam structure and boost your confidence. If you can’t deal with the Cisco 200-301 exam questions, you will inevitably know what to concentrate on to help you pass the CCNA exam on the first try. Hence, taking the CCNA practice test will be crucial to shaping your path by helping you endure an exacting 2-hour-long exam.

4. Become a Part of an Online Community and Forum

You can become a member of an online community where you can meet other exam-takers and professionals with whom you can exchange knowledge and exam tips and find explanations for your doubts. One such community is the CCNA Certification Community on the Cisco Learning Network. Here you can ask queries, exchange ideas and meet with other members studying for the CCNA 200-301 exam. It also contains links to articles that relate to CCNA prep and exams.

How CCNA Practice Test Can Help You Score Much Better in Your Cisco 200-301 Exam

Following are some of the prominent reasons behind the growing importance of CCNA practice tests-

1. Imparts Clarity of the CCNA 200-301 Exam Structure

Practicing CCNA practice tests will allow you to understand the structure of the Cisco 200-301 exam and enhance your odds of passing the exam and getting your desired score in the exam.

2. Analyze Your Weak Areas by Reviewing the Result of the CCNA Practice Test

The evaluation of the performance of your CCNA practice exam can give valuable insights into the areas you need to concentrate on well. Significantly, comprehend how much time you have dedicated to the correct answers. Find shorter ways to solve such questions in less time. This can boost your analytical skills and also give you more time to focus on questions that are tough for you.

3. CCNA Practice Test Works As a Revision of the Whole Syllabus

By performing the CCNA practice test, you can revise the whole CCNA syllabus. A CCNA practice test assesses your skills for the exam and knowledge of the resources you own. Regular practice of CCNA practice tests can strengthen the frequently asked pieces of information and techniques used, and your brain becomes better at recovering them every time. This can help you prepare well for the exam with focus and perseverance.

Also Read: Make Your Resume Competitive With CCNA 200–301 Certification

4. CCNA Practice Test Helps Overcome Exam Anxiety

Finally, any exam can yield a lot of stress, mainly if one isn’t prepared adequately. A CCNA practice test helps you mentally and psychologically ready for an exam and understand how it would feel when solving it.

You learn how to control your anxiety under pressure and concentrate on answering CCNA 200-301 exam questions without worrying about the result. If you score well in a CCNA practice test, it gives you confidence while acing the actual exam.

Conclusion

It’s not possible to think about a career in IT infrastructure and networking without cracking the Cisco 200-301 exam. And to become certified as well as confirm your expertise, you should take up appropriate training and CCNA practice tests. For that, follow the top tips mentioned in this article to pass this exam like a pro. Good Luck!!

Continue reading

How NSO 6.0 Delivers Up To 9x Faster Transaction Throughput

Two years ago we set out on a quest to tune Cisco Network Services Orchestrator (NSO) for massive deployments. The primary challenge was the transaction throughput since no one wants a network that is slow or non-responsive. Customers will shout before you know it “Make your code run faster” or “My system is hanging”.

Today we are happy to announce that we have a significant performance boost for you. I almost dare to say that NSO 6.0 is “The Perfected Sword.” The magic is within the NSO Release 6.0 and the reimagined Transaction Manager. When we started the project we knew that it was our best attribute that was our greatest enemy, as well as our biggest potential. We were challenged as we had to perfect something that made us who we are. Now we are proud to claim that you will get three (3) times faster transaction throughput by only upgrading SW, and up to nine (9) times faster if you engage in optimization. If you are new to NSO and don’t care about the history, you can stop reading now, and enjoy the new version!

For those of you who have been with us for a while, or maybe struggled to scale with NSO, I will add a few layers to the history. If you want to know even more and get hands-on, sign-up for our next Automation Developer Days, Nov 29-30 in New York!

Shaping NSO for Increasing Demand

With an ever-growing network demand, we knew we had to be radical. Future networks need to push through more transactions per second than ever before. Our attempts to help customers optimize their code inside the lock were not enough. We knew about the opportunities to increase the concurrency and performance if we can reduce the time we protect transactions (a.k.a code lock). It would simply let us use the processing power more efficiently.

Things we did in the protected phase.

 

◉ FASTMAP create-code. Can be more or less efficient.

◉ Validations are model-driven constructs such as must, when, leafref, etc. These can be time-consuming.

◉ Kicker evaluations can be more or less efficient

◉ Device communication is normally time-consuming.

A transaction in NSO 5.x and earlier

 

It was tough to realize, but the merits that make NSO so unique also can impact performance at scale. We cannot expect users to write perfect validation expressions just because we know how. We also understood that we could not achieve sufficient gain unless we challenge the NSO heritage and break the transaction integrity, just enough to release the power. That is what makes our transactions fail-safe and also prevents some level of parallelism.

Can we run without locks or can we make the lock shorter? We need to manage any code that runs unprotected without adding too much complexity that eats up the cycles on the other side.

The New Concurrency Model

We put a lot of research behind the new design and the parts that control concurrency. The Transaction Manager is the central piece of this project. It is a specific function outside the database (CDB) that contains all functionality necessary for e.g FASTMAP.

The Transaction Manager controls the concurrency in NSO.

 

We knew that we could do much more in parallel if we can apply “checking” instead of “locking”. We just need to verify that the create condition is still valid when we apply “commit”.  Service invocations, Validations, Rollback file creation and more could potentially run outside the lock if we find a way to detect interference. We went from a pessimistic view of the transaction to an optimistic view to optimize concurrency.

A transaction in NSO 6.0

Conflict detection is one way to verify the conditions at commit and the basis for our new programming paradigm. We basically compare the current transaction read-set to other completed transaction write-sets. If some transaction has changed what the current transaction read, then the current transaction must abort and the services restarted. In this way, we protect existing services from being rewritten. Pretty straightforward, right? Of course, if you do your part to ensure your code is conflict-free you will avoid service restarts and NSO can run full speed.

Another less surprising example is the Commit Queue Option which proved to be very useful for moving device communication outside the lock removing dependencies.

Unexpected Outcomes

The Transaction Manager is probably one of the more well-tested code sections in NSO for a reason. Changing the core architecture can of course be risky. When you start poking around you will have to roll up your sleeves and fix old bugs as you run into them. The upside can be equally motivating as unexpected gains materialize.

◉ Lockless dry-run is one of them. The dry-run transactions will never enter the critical section, not even in LSA. It affects most actions with the dry-run option as well as service check-sync, get-modification, and deep-check-sync.

◉ Improved device locking is another one that allows us to obsoletes the wait-for-device commit parameter. The devices are locked automatically before entering the critical section which simplifies both code and operations.

◉ Improvements backported to the NSO 5.x branch

    ◉ Improved commit queue error recovery

    ◉ Internal performance improvements in CDB

    ◉ Performance Improvement for kicker evaluation

Sometimes it Pays Off to Dare a Little More

Sometimes it is worth trying the more advanced path to reach a certain goal. When you know it works you can simplify and evaluate. Now we challenge you to upgrade to NSO 6.0 and optimize your SW for faster transaction throughput. To learn more I highly recommend the new Packet Pusher podcast that uncovers the new features in NSO 6.0. As the next step, come to Developer Days in New York in November if you want to know more about the details and how you can gain performance with NSO 6.0. You will dive deeper into this topic in hands-on coding sessions led by our experts. If you can’t come to New York or want to come prepared you can always check out the NSO YouTube Channel for the latest content.  We have two particular sessions on the new concurrency model from our previous event in Stockholm. One overview session explains what we have done and one session is a deep dive that focuses on the conflict detection algorithm.

Source: cisco.com

Continue reading

CML 2.4 Now Supports Horizontal Scale With Clustering

When will CML 2 support clustering?

This was the question we heard most when we released Cisco Modeling Labs (CML) 2.0 — and it was a great one, at that. So, we listened. CML 2.4 now offers a clustering feature for CML-Enterprise and CML-Higher Education licenses, which supports the scaling of a CML 2 deployment horizontally.

But what does that mean? And what exactly is clustering? Read on to learn about the benefits of Cisco Modeling Labs’ new clustering feature in CML 2.4, how clustering works, and what we have planned for the future.

CML clustering benefits

When CML is deployed in a cluster, a lab is no longer restricted to the resources of a single computer (the all-in-one controller). Instead, the lab can use resources from multiple servers combined into a single, large bundle of Cisco Modeling Labs infrastructure.

In CML 2.4, CML-Enterprise and CML-Higher Education customers who have migrated to a CML cluster deployment can leverage clustering to run larger labs with more (or larger) nodes. In other words, a CML instance can now support more users with all their labs. And when combining multiple computers and their resources into a single CML instance, users will still have the same seamless experience as before, with the User Interface (UI) remaining the same. There is no need to select what should run where. The CML controller handles it all behind the scenes, transparently!

How clustering works in CML v2.4 (and beyond)

A CML cluster consists of two types of computers:

◉ One controller: The server that hosts the controller code, the UI, the API, and the reference platform images

◉ One or more computes: Servers that run node Virtual Machines (VMs), for instance, the routers, switches, and other nodes that make up a lab. The controller controls these machines (of course), so users will not directly interact with them. Also, a separate Layer 2 network segment connects the controller and the computes. We chose the separate network approach for security (isolation) and performance reasons. No IP addressing or other services are required on this cluster network. Everything operates automatically and transparently through the machines participating in the cluster.

This intracluster network serves many purposes, most notably:

    ◉ serving all reference platform images, node definitions, and other files from the controller via NFS sharing to all computes of a cluster.

    ◉ transporting networking traffic in a simulated network (which spans multiple computes) on the cluster network between the computes or (in case of external connector traffic) to and from the controller.

    ◉ conducting low-level API calls from the controller to the computes to start/stop VMs, for example, and operating the individual compute.

Defining a controller or a compute during CML 2.4 cluster installation

During installation, and when multiple network interface cards (NICs) are present in the server, the initial setup script will ask the user to choose which role this server should take: “controller” or “compute.” Depending on the role, the person deploying the cluster will enter additional parameters.

For a controller, the important parameters are its hostname and the secret key, which computes will use to register with the controller. Therefore, when installing a compute, the hostname and key parameters serve to establish the cluster relationship with the controller.

Every compute that uses the same cluster network (and knows the controller’s name and secret) will then automatically register with that controller as part of the CML cluster.

CML 2.4 scalability limits and recommendations

We have tested clustering with a bare metal cluster of nine UCS systems, totaling over 3.5TB of memory and more than 630 vCPUs. On such a system, the largest single lab we ran (and support) is 320 nodes. This is an artificial limitation enforced by the maximum number of node licenses a system can hold. We currently support one CML cluster with up to eight computes.

Plans for future CML releases

While some limitations still exist in this release in terms of features and scalability, remember this is only Phase 1. This means the functionality is there, and future releases promise even more features, such as the:

◉ ability to de-register compute

◉ ability to put computes in maintenance mode.

◉ ability to migrate node VMs from one compute to another.

◉ central software upgrade and management of compute

Source: cisco.com

Continue reading

Empowering the four IT personas using Cisco DNA Center with Rings of Power

There are many variations of the “Law of Constant Change”; while they all have their own spin on it, the common thread is that change is constant and that it needs to be harnessed. When looking at changes and disruptions in technology, it comes as no surprise that there are numerous transformations and trends which are reshaping the IT landscape. The megatrends and change drivers span a wide range of business changes and transformation agents such as:

To keep up with the rapidly changing IT landscape, many IT organizations have been able to ascend and transform into new operational paradigms with the xOps transformation. Conversations around agility, AIOps, NetOps, SecOps, and DevOps are an outcome of a combination of organizational behavior and tooling in the networking and infrastructure realms. Separately, Gartner has also identified four IT personas (NetOps, SecOps, AIOps, and DevOps) which Gartner defined as predominant roles in today’s network operations realm.

In looking at key challenges, organizations are struggling with:

◉ Reducing time recovery objectives due to the reactive nature of traditional network operations practices.

◉ Bridging the growing IT skill gap.

◉ Keeping up with changing business requirements.

◉ Delivery of secure services in the hybrid workplace.

◉ Having to deliver more with less.

With Cisco’s years of expertise in designing, operating, and supporting networks of all sizes across the globe. Cisco has been an instrumental part in helping IT organizations move forward to the next operational level with tools to embrace and enable the xOps personas and embark on the transformation journey. This boils down to providing tools with analytics capabilities from the infrastructure and cultivating staff skills to use them effectively.

Speaking of how tooling can enable the transition, Cisco DNA Center is at the center of the IT/OT transition into the four IT personas, providing the digital agility to drive network insight automation and security while promoting key capabilities and tools to help in skill cultivation and changed operational models.

Network Operations or “NetOps” is the front line of administrators in the IT organization. The term NetOps is a way to classify the common tasks and responsibilities, or “Jobs to be Done,” by these individuals. With Cisco DNA Center at the heart of the network infrastructure, the NetOps persona is enhanced with varying levels of automation to simplify the creation and maintenance of networks with agile flexibility to move from manual tasks to AI-assisted to selectively autonomous network management. For example, the SWIM (Software Image Management) and network profiles feature not only save time but allow for consistency and elimination of human error with routine tasks. The NetOps automation brought into DevOps provides agility and scalability to IT organizations to keep up with changing demands and integration into the larger IT ecosystem. Gartner has stated that the next generation of Netops, which Gartner coined as “Netops 2.0” is the evolution of network operations towards automation.

Network, application, and user security is a key requirement for any enterprise network, and no network can operate safely without security. The security team is responsible for providing a safe digital experience in today’s connect-from-anywhere hybrid work environment and networks with countless numbers of endpoint devices. Also, many IT organizations in different market segments have various network security and architecture recruitments. Cisco DNA Center empowers the SecOps persona by enabling the complete zero-trust workplace solution with AI-driven security to classify endpoints and automated enforcement of security policies. This is achieved with Cisco’s fully integrated platform, which incorporates hardware and software designed to provide contextual security insights and automation. Cisco DNA Center SecOps can help eliminate security vulnerabilities with proactive security scans, automated security advisory alerting Cisco’s Product Security Incident Response Team (PSIRT), and proactive bug scans powered by Cisco AI Network Analytics engine to ensure the network is always secure.

The DevOps persona brings integration, automation, and orchestration together. Traditionally, DevOps teams focused on very specialized, proprietary, and home-spun applications. Today, these individuals are tasked with taking these apps and integrating them into a connected universe of corporate solutions. DevOps depends on manufacturer-supplied software tool kits (STKs) and standards-based application programming interfaces (APIs) in order to share information and intelligence between applications. With Cisco DNA Center, IT organizations can quickly utilize pre-built integrations to Cisco products and 3rd party enterprise applications such as ServiceNow, Splunk, PagerDuty, and a growing selection of partner integrations. Cisco DNA Center’s mature APIs enable the extraction of data and network management, leveraging and harnessing the power of Cisco DNA Center’s NetOps, AIOps and SecOps via the API interface.

AIOps defines the technologies that implement AI/ML (Artificial Intelligence and Machine Learning) and the individuals that leverage these technologies. Evidently, AI/ML is being implemented in so many of our networking components that it has become imperative that a specialized team of experts manage and amplify the use of this intelligence. Cisco DNA Center provides a simplified view into the complexities of big data and machine learning so that your AIOps teams can make the most of this rich data.  Additionally, Cisco DNA Center provides best-in-class AI-driven visibility, observability, and insights, ensuring the health and experience of users, applications, and infrastructure. AI/ML is packaged within Cisco DNA Center in an easy consumption interface that can deliver value in minutes and allow IT teams to work smarter and elevate the level of service to the users and organization. Hence, with Cisco DNA Center AIOps, IT organizations can gain visibility and insights otherwise not attainable without AI/ML combined with Cisco’s deep networking knowledge. Simply put, this powerful combination makes the IT team more agile and smarter and helps bridge growing IT skills gaps.

The xOps Rings of power

While the four IT personas were explained as distinct roles, in many organizations, they are simply different hats that IT staff can wear at different times depending on the business need.  It is also essential to keep the perspective that each of the personas enables and provides services to other personas, yielding the “Rings of Power” for example, with AI centricity, Cisco DNA Center empowers, enables, and enhances the NetOps, SecOps, and DevOps personas by providing interactions with all personas in the ring. Similarly, NetOps persona-centricity enables and empowers DevOps, SecOps, and AIOps personas.

An example of the AIOps ring of power:

AIOps discovers security vulnerabilities and recommends an upgrade.

NetOps performs the SWIM process to upgrade the software.

DevOps connects to ServiceNow for the change management and ticket creation processes.

SecOps reports the new network security posture, eliminating the security vulnerability from the network.

Leveraging Cisco DNA Center to enable and empower the new IT personas model, IT organizations can quickly and easily gain visibility, observability, insights, and out-of-the-box automation. While organizations with more modern operational models are also able to yield zero trust, and programmability from the Cisco Network infrastructure. This enables IT organizations to be more agile and transform into the new xOps operational paradigm, allowing the IT organization to progress on the operational maturity journey, become proactive and leave the reactive persona behind.

Source: cisco.com

Continue reading

[New] 200-301 CCNA: Cisco 200-301 Free Exam Questions & Answers

 

Cisco CCNA Exam Description:

This exam tests a candidate's knowledge and skills related to network fundamentals, network access, IP connectivity, IP services, security fundamentals, and automation and programmability. The course, Implementing and Administering Cisco Solutions (CCNA), helps candidates prepare for this exam.

Cisco 200-301 Exam Overview:

• Exam Name- Implementing and Administering Cisco Solutions
• Exam Number- 200-301 CCNA
• Exam Price- $300 USD
• Duration- 120 minutes
• Number of Questions- 90-110
• Passing Score- Variable (750-850 / 1000 Approx.)
• Recommended Training- Implementing and Administering Cisco Solutions (CCNA)
• Exam Registration- PEARSON VUE
• Sample Questions- Cisco 200-301 Sample Questions
• Practice Exam- Cisco Certified Network Associate Practice Test

Cisco 200-301 Exam Topics:

• Network Fundamentals- 20%
• Network Access- 20%
• IP Connectivity- 25%
• IP Services- 10%
• Security Fundamentals- 15%
• Automation and Programmability- 10%
  

Related Articles:-

1. CCNA Practice Test: Your Best Assistants to Tackle CCNA 200-301 Exam
2. CCNA 200-301 Exam: Details, Preparation Options and Career Scope
3. Why Is CCNA Practice Test Important for Cisco 200-301 Exam Preparation?
4. Why Now Is the Time to Pass CCNA 200-301 Exam?
5. Will CCNA Practice Test Have an Impact on Cisco 200-301 Exam Score?
6. Some Useful Tips to Pass Cisco 200-301 Exam Using CCNA 200-301 Practice Test
7. Prepare for CCNA 200–301 Exam With CCNA Practice Test
8. Appearing For CCNA 200-301 Exam? CLICK HERE.

Continue reading